Description:
Salt spray testing is a corrosion testing process used to match real corrosive environments as closely as possible, and simulates those environments in order to observe the corrosion resistance of components and materials, such as automobile components, aviation devices, construction materials, coated components and electrical devices in salty and corrosive environment.
The automatic salt spray test chamber is designed according to JIS, ASTM, CNS, GB standards, and features a touch screen control.
Parameter
Model
KM-F-60C
KM-F-90C
KM-F -120C
KM-F-160C
KM-F -200C
Interior dimensions (L*W*H)
600*450*400mm
900*600*500mm
1200*800*500mm
1600*1000*500mm
2000*1000*600mm
Exterior dimensions (L*W*H)
1070*580*1030mm
1380*800*1150mm
1700*900*1210mm
2250*1200*1250mm
2650*1200*1350mm
Temperature range
35℃-55℃
Temperature fluctuation
±0.5℃
Temperature uniformity
±2℃
Temperature precision
±1℃
Testing chamber temperature
Spraying (NSS AASS)35±1℃; Spraying (CASS) 50±1℃
Pressure tank temperature
Spraying (NSS AASS)47±1℃; Spraying (CASS) 63±1℃
Salty water temperature
35℃±1℃
Spraying rate
1.0-2.0ml/80cm²/hr
PH
NSS(6.5-7.2);AASS CASS(3.1-3.3)
Interior volume
108L
270L
480L
800L
1200L
Salty water tank volume
10L
15L
20L
20L
30L
Power supply
1 phase,AC220V,50/60Hz,20A
3 phase,AC380V,50/60Hz,30A
Sensor
Spray device
Collection hopper
Pressure gauge
Features
The interior and exterior are made of a 5-mm-thick, grade A, reinforced hard plastic plate with a smooth surface and aging and corrosion resistance.
The cover is made of a transparent impact-resistant plate that allows researchers to observe the samples. A groove below the cover is filled with water in order to prevent salt spray leakage.
The machine will directly heat the water using a heater installed on the bottom of the water tanks. This ensures the water heating is faster, and temperature remains even and uniform.
Operators can observe the salt water volume using a transparent panel on the water tank, and manually add more salt water when the water level is low.
The water circulation system is carefully designed in order to ensure normal machine operation.
The pressure tank is made of SUS304# stainless steel, with an anodized surface in order to ensure a good corrosion resistance.
The salt spray chamber features over pressure, over temperature, and overload protection.
KOMEG Technology Ind Co.,Ltd. Add.: No.1 Factory: Building 12, Songshan Lake, Small and Medium-Sized Science and Technology Park, Dongguan City, Guangdong Province
No.2 Factory: KOMEG Building, North Road 4th, North Industrial, Songshan Lake, Dongguan City, Guangdong Province Postcode: 523808 Fax: +86-769-83396675
